Acting on intelligence out in the field, undercover fixing specialist Ancon has launched a new super-Bond, ultra-low thermal conductivity wall tie that even SPECTRE would find hard to crack!
Based on Ancon Building Products’ award-winning TeploTie with a conductivity of 00.7 W/m/K which virtually eliminates heat loss through thermal bridging in cavity wall construction, the new Teplo-BF basalt fibre wall tie features specially-moulded safety ends that improve buildability and enhance mortar bond strength by up to 80%.
The new user-friendly design has exceptional mortar-grabbing capability, making Teplo-BF particularly suitable for use with lime and other slow-drying mortars.
The Teplo-BF, like the original TeploTie which was introduced into the UK and Ireland by Ancon in 2010 and has since been used on a number of PassivHaus and Zero-Carbon buildings, is created by the setting of innovative pultruded basalt fibres in a resin matrix. This composite material provides a combination of high strength and thermal efficiency.
The ultra-low thermal conductivity means that Teplo-BF ties are excluded from U-value calculations to BS EN ISO 6946, helping to minimise insulation and wall thickness, a particular benefit in modern low-energy construction applications.
Available in the same wide range of lengths and types as the original TeploTie, the new Teplo-BF wall tie is suitable for cavities up to 450mm wide and buildings up to 18 metres in height. It carries NHBC approval and achieved BBA Agrément Certification this month. See Product Sheet 3 of Agrément Certificate 14/5160.
Ancon Marketing Manager Annabelle Wilson said:
“Following discussions with building contractors, Ancon identified a need for a more user-friendly design, offering a more robust bond that is better suited to the general site environment, and greater versatility in the choice of mortars with which Teplo ties can be used. The new Teplo-BF not only meets these requirements but the new moulded ends make these ties safer for bricklayers to work around too.
“This range extension provides the market with three distinct Teplo options – the original TeploTie for new-build applications and resin-fixing into an existing structure during retrofit, the Teplo-L-Tie for surface fixing to an in-situ structural frame, and the Teplo-BF, an improved new-build cavity wall tie with high bond strength even in slow-drying mortars and moulded safety ends. Ancon’s comprehensive wall tie range includes a low thermal conductivity fixing for almost any masonry construction project.”
For more information or to enquire about this product please contact Ancon Building Products on +44 (0) 114 275 5224 or visit their website www.ancon.co.uk.
Introducing the new Bond.