The British Board of Agrément, the UK’s primary building product certification organisation, has launched a wide-ranging consultation aimed at driving forward product safety in the construction and refurbishment of Higher Risk Residential Buildings (HRRBs).

The initiative, championed by recently-appointed Technical Director Bill Hewlett, is focusing on the role that building product certification has to play and how it can assist in meeting the higher safety standards required for HRRBs as identified in Dame Judith Hackitt’s 2018 report ‘Building a Safer Future’, produced in response to the Grenfell tragedy.

Dame Judith is supporting the consultation and the BBA’s call for contributions from a diverse and broad spectrum of stakeholders, including those involved in the manufacture, supply and installation of building products for HRRBs; designers, specifiers and constructors of HRRBs; asset managers with responsibility for the safety and maintenance of HRRBs; financial partners including insurers, lenders and investors and local authorities, their agencies and central government.

Hardy Giesler, BBA CEO, said the success of the initiative was dependent upon strong consultee support; he called on the construction industry and allied sectors to feedback and collaborate in order to secure consensus for an effective approach to certificating products for safer HRRBs.

“Providing safe, fit-for-purpose and affordable housing remains a challenge and product certification has an important part to play,” said Mr Giesler. “The BBA Agrément certification scheme has served the industry well for more than 50 years but it is widely recognised that HRRBs pose specific and unique challenges. It is these that we wish to address through engagement with as many stakeholders as possible in order to reach agreement on the best way forward.

“Our objective is to generate a solution that has broad support across the many diverse stakeholders. The BBA will be working with Dame Judith, the Industry Safety Steering Group and the recently announced Construction Product Regulator to ensure a fit-for-purpose outcome with full industry backing.”

The BBA has set the ball rolling with the proposal of an Agrément Plus certification scheme to deal specifically with HRRB safety requirements. The proposed scheme has four key elements:

  • Earlier involvement with certification clients in their product development process.
  • An enhanced testing regime that will see the BBA actively seek involvement in testing typically engaged in during product development cycles. It will seek to review all test results made, as well as observation of tests submitted for assessment and certification purposes. This will include fire testing.
  • Sample analysis/characterisation (fingerprinting): this is a developing science and not without challenges. However, there is value in storing original samples used for testing and assessment as reference material. A product sample ‘DNA’ or ‘fingerprint’ is a viable alternative to storing actual samples.
  • Regular and ongoing testing regime post-certification: At present product testing is carried out pre-certification. The BBA proposes a new testing programme, with randomly selected materials, to be carried out unannounced at regular intervals.

Mr Giesler added: “Agrément Plus demonstrates that we are prepared to be bold in our approach to making HRRBs safer but we very much need industry feedback to ensure that any new approach is effective and workable for all stakeholders.”

To take part in the consultation process visit: www.bbacerts.co.uk/getinvolved

The consultation process will run until Friday, March 19th.

To take part in the consultation process or to find out more, 

Published On: 18 February 2021|Categories: News|

Share This Story, Choose Your Platform!

Related News

The British Board of Agrément, the UK’s primary building product certification organisation, has launched a wide-ranging consultation aimed at driving forward product safety in the construction and refurbishment of Higher Risk Residential Buildings (HRRBs).

The initiative, championed by recently-appointed Technical Director Bill Hewlett, is focusing on the role that building product certification has to play and how it can assist in meeting the higher safety standards required for HRRBs as identified in Dame Judith Hackitt’s 2018 report ‘Building a Safer Future’, produced in response to the Grenfell tragedy.

Dame Judith is supporting the consultation and the BBA’s call for contributions from a diverse and broad spectrum of stakeholders, including those involved in the manufacture, supply and installation of building products for HRRBs; designers, specifiers and constructors of HRRBs; asset managers with responsibility for the safety and maintenance of HRRBs; financial partners including insurers, lenders and investors and local authorities, their agencies and central government.

Hardy Giesler, BBA CEO, said the success of the initiative was dependent upon strong consultee support; he called on the construction industry and allied sectors to feedback and collaborate in order to secure consensus for an effective approach to certificating products for safer HRRBs.

“Providing safe, fit-for-purpose and affordable housing remains a challenge and product certification has an important part to play,” said Mr Giesler. “The BBA Agrément certification scheme has served the industry well for more than 50 years but it is widely recognised that HRRBs pose specific and unique challenges. It is these that we wish to address through engagement with as many stakeholders as possible in order to reach agreement on the best way forward.

“Our objective is to generate a solution that has broad support across the many diverse stakeholders. The BBA will be working with Dame Judith, the Industry Safety Steering Group and the recently announced Construction Product Regulator to ensure a fit-for-purpose outcome with full industry backing.”

The BBA has set the ball rolling with the proposal of an Agrément Plus certification scheme to deal specifically with HRRB safety requirements. The proposed scheme has four key elements:

  • Earlier involvement with certification clients in their product development process.
  • An enhanced testing regime that will see the BBA actively seek involvement in testing typically engaged in during product development cycles. It will seek to review all test results made, as well as observation of tests submitted for assessment and certification purposes. This will include fire testing.
  • Sample analysis/characterisation (fingerprinting): this is a developing science and not without challenges. However, there is value in storing original samples used for testing and assessment as reference material. A product sample ‘DNA’ or ‘fingerprint’ is a viable alternative to storing actual samples.
  • Regular and ongoing testing regime post-certification: At present product testing is carried out pre-certification. The BBA proposes a new testing programme, with randomly selected materials, to be carried out unannounced at regular intervals.

Mr Giesler added: “Agrément Plus demonstrates that we are prepared to be bold in our approach to making HRRBs safer but we very much need industry feedback to ensure that any new approach is effective and workable for all stakeholders.”

To take part in the consultation process visit: www.bbacerts.co.uk/getinvolved

The consultation process will run until Friday, March 19th.

To take part in the consultation process or to find out more, 

Published On: 18 February 2021|Categories: News|

Share This Story, Choose Your Platform!

Related News

Get in touch

Please complete the form below and we will contact you as soon as possible.

To help us to respond to your inquiry as quickly as possible, we have put a handy list of our services below.

  • ISO 9001

  • ISO14001

  • ISO 45001

  • Factory Production Control for UKCA/CE

  • UKAS Accredited Reinforcing Steel Scheme

  • National Highway Sector Scheme (NHSS)

  • Factory Production Control for EN1090 Structural Steel

  • Agrément Certificate
  • Reproduction Certificate

  • Highways Authority Product Approval Scheme (HAPAS)

  • Microgeneration Certification Scheme

  • Secured By Design

  • Certification in support of Product Conformity UKCA/UKTA

  • BBA Approved Installer Scheme

  • BBA Competent Person Scheme

  • BBA Gas Membrane Approved Installer Scheme

  • TrustMark Registration

  • TIMSA

  • High Friction Surfacing Installer Scheme

  • BBA UKAS Accredited Scheme PAS 2030

  • BBA Client Managed Inspection Service

  • Durability Testing

  • Mechanical, Physical and Structural Testing

  • Weather Resistance and Wind Serviceability Testing

  • Conformance Testing and Fit-for-Purpose

  • Thermal Performance Testing

  • Onsite Testing and Trials

  • Bespoke Testing